Naval Academy Autonomous Underwater Vehicle Team

Video from 2010

2010-08-29T19:58:00.000-04:00

Check out this youtube video of our run that won us 2nd Place overall.

http://www.youtube.com/watch?v=CEDqCgpJi2o

All Packed up and Shipping out

2010-07-09T11:32:00.001-04:00

We have packed up the AUV and sent it out to San Diego. We'll be able to put it back to working order by noon Tuesday.

Great Finish to a Bad Week

2010-07-07T17:09:00.001-04:00

Last Friday we managed to fry all four of our thrusters and we have no idea how it happened. We came in Friday morning after I-Day for the class of 2014, we planed to take the vehicle to the pool that morning so we tried to conduct a brief test in the lab before heading to the pool. Upon discovering that some of the thrusters where not working properly, so we began trouble shooting. In the process of trouble shooting we managed to create a large spark. We have no idea how it happened but for the rest of Friday and all of Tuesday we tried to find what caused the problem. By the end of the day we found that we had damaged the D2A board and after replacing that everything work fine. We have had to replace all of the thrusters, find a leak, and fix the leak. Today we have managed to tweak our heading control and conduct waypoint driving all without our camera box because it is currently in the machine shop or our vertical thrusters (we only had 3 spare thrusters).

Tomorrow we start packing in order to have the vehicle and everything we need in San Diego when we show up so we can hit the ground running in San Diego.

5ft Depth Test

2010-06-29T16:41:00.001-04:00

6.29.2010 Pool Tests

2010-06-29T16:37:00.001-04:00

Today was the first day the entire team took the AUV down to conduct some tests in the pool. We took the AUV to the diving well in Lejeune Hall to tweak the gains on the controllers. You can see from the graph that the initial gains caused the vehicle to be unstable, but for the second test we changed the gains and it worked well even with a disturbance. We also worked on the heading and pitch controllers. Although they aren't quite where we want them for competition, we have been able to make significant improvements. Today was very productive but we won't work much for the next two days because we have been loaned out to help with I-Day here at the Academy. Come friday and next week we will be in full swing.

USNA AUV Team 2010

2010-06-24T08:46:00.001-04:00

USNA is getting ready for the 2010 AUVSI. We've got only 4 team members this year and our project adviser is still CAPT Jack. Team Captain is 2ndLT Joseph Jennett, with 2ndLT Kevin Fleischer working with the cameras. ENS Harry Davis and MIDN 1/C Paul Schouppner are working on the programs. So far this year we have changed out the DVL, redesigned the power supply, rewritten the code, and created some new circuit boards that replace two old circuit boards. We also had to fix the tail of the frame that held the aft thruster on after it broke earlier this year.

Starting next week, for the first time this summer, the entire team will be here working on the vehicle at the same time. We've all got different schedules and other things we have to do, but for the next couple of week everything will be about winning the 2010 AUVSI....

After the Competition

2010-02-03T17:01:00.000-05:00

AUVSI 09 Day 2

2009-07-29T23:33:00.002-04:00

It's been a long day for the USNA AUV team we left the hotel for testing at 4:50am and didn't finish until almost 8pm, making for an exhausted, but satified team. The vehicle performed very well today, qualifying in the first seconds after being lowered into the TRANSDEC and proving that it's robust design has great potential for the competition.

Below is a combination of all the pictures that we took of all the other team's vehicles in the AUVSI competition and them working around the pool.

AUVSI Day 1

2009-07-29T01:31:00.002-04:00

Today was a long but progressive day. We arrived yesterday evening late after barely making our flight connection in Atlanta.

This morning we expected to have our vehicle at the TRANSDEC facility waiting for us be unfortunately it didn't arrive until 2 hours later. Not being deterred, we at breakfast at the nearest Denny's and to our surprise met a USNA alumni which covertly and graciously paid for our breakfast!

After we picked up our gear, we headed over to a nearby pool for testing where we spent most of the day threshing out any possible bug we could stir up.

During the testing Captain Nicholson and Sayre took a trip to the Tecnadyne company, who refurbished two of our thrusters, where we got a tour of the literally "in house" workshop where our thrusters were built.

To finish the long day we ate a satifying dinner at Olive Garden and made plans to leave our hotel at 4:50am tomorrow morning to begin testing again.

(The picture is of the TRANSDEC facility that we will be competing in)

Shipped!

2009-07-24T16:26:00.002-04:00

Today we shipped our vehicle. After very promising testing yesterday we are excited about the upcoming competition and our odds against other teams. We were able to use pelican cases for transport this year, giving us peace of mind as to the safety of our vehicle and tools during transport.

San Diego here we come!

Major progress with cameras

2009-07-05T11:35:00.003-04:00

After looking through the parts bin, we found a lens that can see objects from a reasonable distance (closer than 6 feet away)! After a day in the pool with the new lens taking some training pictures and some time with the DVT scripting tools, a product has been created that can now recognize the majority of the competition vision tasks. Future testing will be conducted to evaluate the product's ability to recognize objects at varying lighting conditions and distances from objects.

A Productive Week

2009-06-27T16:15:00.003-04:00

This week the team was able to do two days of pool testing which helped us to identify a couple of areas in the control code where we could optimize and improve the overall vehicle performance. Our mission devices have all been designed and we are waiting for a few of the last pieces to arrive before we attach them to the vehicle.

The vehicle's cameras are currently being trained to the competition elements that we constructed. (More Pictures of those photo album on the right side)
Here are a few of the pictures from the testing this week.

Returned and Working

2009-06-27T16:07:00.003-04:00

The entire team is back now and our team Captain even got married! Here is a picture of him and his new wife at the Wedding and in Barbados during their Honeymoon.

2009-06-19T14:02:00.002-04:00

Another week has gone by and progress has been achieved. Numerous hurdles have been overcome including the fixing of the addition to kill switch relay and getting rid of a battery. One of our problems was that it seemed like the vehicle would recieve intermitent commands to the thrusters. this resulted in some serious code searching for probelms. However, it seems the fault lay with a bad battery. Right now the vehicle can maintain a stable depth, reasonable heading control, and waypoint navigation all at the same time. Additionally, we have the dropper board installed inside of the vehicle and ready to be used. It seems our biggest hurdle now will be finding places to put everything onto the vehicle. Maybe we''ll give this turtle some legs. Either way our vehicle is now more capable than the vehicle we had at the end of last years compeition ahcieving an almost .1 m accuracy to waypoints can maintain that point within .3 m. Next week all the troops will be assembled and we shall see how much we can do. The video is of the vehicle sucessfully completing the box test, drive a series of waypoints in the shape of a box below the water while maintinging a depth of 1 foot. The only real issue seems to be a need for better heading control and that without the weight of the cameras the vehicle pitches but those should be resolved before the competion.

Its been a while

2009-06-10T09:15:00.002-04:00

I guess we have been slacking when it comes to posting recent developments. That will happen when graduation, comission, final exams, and one team member getting married all occur at the same time. Anyway, currently we have constructed an entire mock up of the course we will be facing in San Deigo so that we will be able to fully test of AUV prior to the compeition. Hopefully this means we can post video prior to the competition to instill fear amongst our foes, but we'll see. The kill switch has also been modified to accomodate the new rules requiring the kill switch to be on and magnet passed over a reed switch to allow the thrusters to power on . The new DVL has been fully integrated into the programing code. We have also finally managed to get the power supply issues to our wireless router completely figured out, freeing us of the infernal Xbee and hyperterminal. For those who don't know what those are, consider yourself lucky. Additionally, we have recieved and calibrated our new compass, a TCM 2.6, and it seems to working fine. Maybe just maybe, we will have a reliable compass but it has yet to be installed. The guy in charge of the forward instrument case is dillydalling in some sunny locale. That is all for now and I will post as more as things occur.

2009-04-24T20:45:00.005-04:00

We did implementation testing of our programming buoy today. The buoy will allow us, during testing, to easily modify the AUV's programming with a drag and drop GUI as well as view live video feeds while the vehicle is submerged. We found that the powering of the buoy is ok, although the battery life was shorter then we expected and the wiring of the Ethernet cable through the SEACON connector was mis-wired. We have fixed the wiring but are waiting to charge the existing batteries fully before our next test.

Stable Control Testing

2009-04-16T00:01:00.008-04:00

The above video shows pool testing demonstrating stable heading, depth, and pitch control. The photos are a few from the same testing session (More to come)

Pool Testing

2009-04-13T16:58:00.004-04:00

More footage from testing last Friday.

Depth and Pitch Test

2009-04-12T15:40:00.006-04:00

The team successfully completed a stable depth and pitch test of the AUV. After tweaking the integral and derivative terms in our PID depth controller we were able to eliminate any oscillation and achieve a very acceptable settling time. The depth cell which was used for this test has a slight bias that caused a small amount of depth error but this problem will be rectified shortly when the new cell is installed.

Thruster Testing

2009-04-06T21:28:00.003-04:00

Component Integration Tests Complete

2009-03-30T19:02:00.003-04:00

All tests of the AUV components including the thrusters, DVL, depth cell, and compass are completed. Each of the ports had to be checked for pin-out order, voltage supplied and communication with the main computer to ensure that the vehicle is ready for water testing.

We are programming a demonstration plan for the AUV to include precision navigation using the compass and depth cell. The demonstration/test is scheduled for Friday and will show that our vehicle is completed and ready for operation. Naturally, we are going to continue to upgrade and perfect the programming and tasking for the vehicle but we will merely be making tweaks and improvements.

The frame is not going to be returned from the paint shop until thursday which means that we need to have the computer and programming ready for installation as soon as the frame is returned.

Looking Back...

2009-03-24T20:58:00.008-04:00

After returning from break we weighed the AUV and were pleased when it weighed in at 38.92lbs. This is a significant improvement from last year's vehicle (yellow AUV above) which was 50lbs at the competition.
This was one of the primary objectives throughout the construction process this year and was accomplished through multiple means. Primarily the Doppler Velocity Log, Main Pelican Case housing, and clear Camera Case housing were all substituted for smaller equivalents.

The frame was dropped off today for painting at Fitzgerald Body shop in Rockville, MD which graciously offered to give the extruded plexiglass a high gloss professional paint job. We hope to have it back by next week so we can begin pool testing.

Wiring Is Complete

2009-03-12T16:57:00.004-04:00

All major systems of the 2009 AUV nicknamed "Awkward Turtle" have been wired and connected to the computer and vehicle. Before all systems are powered up we are going to conduct a complete system voltage and continuity checks to ensure that all of our systems will not be overloaded or "fried". All of these check will be completed after spring break while everyone takes some much deserved time off and we prepare for the end of the semester.

After Wire Management

2009-03-11T17:31:00.003-04:00

Before Wire Management

2009-03-10T16:39:00.003-04:00

The Brain

2009-03-08T13:44:00.003-04:00

The big push this week is to complete the wiring of the components to the computer and ensure that all leads are installed correctly. This is easier said then done, as shown by the picture, because there is such a mass of identical wires that can only go to their one specific place on the computer or power sources.

Leak Testing Complete

2009-03-06T13:07:00.004-05:00

The testing of all waterproof connections on the vehicle main housing and camera housing is complete. Upon submerging the housings under the surface of the water they were moved to different depths with 15 feet being the maximum. Total testing time underwater was 1 hour 45 minutes. After retrieval, the inside's of the cases were visually and physically inspected for any moisture that might have leaked through. No moisture was found inside of either case, passing all tests with flying colors.

Waterproof Connections Installed

2009-03-04T06:49:00.003-05:00

All eleven waterproof SeaCon connectors have been installed on the main housing as well as the one on the camera housing. The layout of the connectors had to be precisely measured in order to ensure maximum spacing between the elements which would give the greatest amount of structural stability of the front mounting area.

The penetrations will allow for a method of disconnecting any single element without compromising the water tight integrity of the main housing. These connectors connect the thrusters, depth cell, cameras, compass, sonar, Ethernet tether, and kill switch to the main housing.

Breakout Board Completed

2009-03-03T17:08:00.002-05:00

Today the breakout board for the computer to communicate with all the components has been completed. The greatest improvement over last year's design is the footprint, which is essentially half the area as last year's board and now fits completely beneath the computer. This puts the team on schedule to complete the vehicle assembly by spring break next week.

Circuit Board Design Complete

2009-02-24T16:01:00.002-05:00

The circuit board has been designed, completed and sent out for printing. The design has been greatly improved from last year's AUV. The new design has a smaller footprint and is more efficient on it's use of pins. With the new design we have also created an effective way of managing the wires to make the overall appearance much more professional and organized.

Camera box mk1mod2

2009-02-24T11:54:00.006-05:00

The previously designed camera box foam enclosure was using 4lb/ft^3 weight foam. This presented the possibility of it breaking in some way. The new foam enclosure uses 10lb/ft^3 weight foam and has characteristics similar to a wood block.

Camera box design

2009-02-21T11:18:00.003-05:00

Many different solutions as to the creation of a structure for the inside of the camera box were devised. However, since it is hard to effectively glue anything to the plastic of which the camera box is made, a foam structure was carved. This stops movement by simply filling all of the free space within the box, and will help prevent reflected light within the box.

DVL

2009-02-17T09:30:00.004-05:00

The new DVL is up and running. There are significant changes from last year's DVL but it will still provide the necessary, though less, data. However, this data comes in a different format than last year's DVL so the code will have to be significantly changed. Also, the DVL does not operate normally in air, going into a search mode that causes a very slow ping rate. On a side note, LinkQuest provides little documentation on their product and customer support can be frustrating, but entertaining, to deal with.

New Compass

2009-02-17T07:33:00.005-05:00

Due to poor performance and a decaying lifespan we have sought a new compass to replace the old Honeywell that we have been using for years.

The new compass has improved versatility with a greater pitch and roll range as well as hard and soft iron calibration. The new TCM 5 compass was graciously given to us by PNI and we are looking forward to installing it on the vehicle.

Through box switch

2009-02-08T20:26:00.002-05:00

A test rig was constructed using an old Pelican case and an electromagnet from last year's team. First a hall effect switch was tested; in theory this switch will stop current flow when a certain density of magnetic flux is near it. Testing outside the box worked extremely well from all directions, but failed when connected to the test rig. The reed switch could be triggered through the test rig only using a stack of at least 4 rare earth magnets. If a stronger electromagnet could be found, I beleive that both could easily be triggered through the box. However, the hall effect sensor would be the way to go since the direction of the magnetic force does not effect its trigger.

The Frame has been Fabricated

2009-02-05T08:07:00.002-05:00

This week we finished the fabrication of the frame and it turned out practically identically to what we designed on the computer. There are still a few washers that need to be added and holes to drill which allow free flooding of the frame but the entire team is very pleased with the results.

Compass Calibration

2009-02-02T12:31:00.002-05:00

Calibrating the compass has proved to be more of a challenge then expected because due to a saturation of magnetic fields in our lab building we cannot calibrate it in our lab.

I have another location but with the same results. I'm sending it to one last location for calibration and if we are still encountering magnetic saturation then the problem may be with the compass. The good news is that the roll and pitch measurements are accurate and reliable to +/- 80 degrees.

Method For a Robust Camera System

2009-01-31T16:37:00.003-05:00

By teaching the camera multiple models of the same object in different lighting conditions, a change in lighting will not effect its ability to recognize an object. The more cases it it taught, the less of a chance lighting will cause any effect. Frame refresh rate is still extremely low, somewhere near 0.5 Hz. I have attempted to optimize it by limiting the pre-processes (ie. filters) the camera uses, but this has only had minor effects.

Object locate function

2009-01-30T10:29:00.002-05:00

It appears that the cameras have an object locate function. They don't react to changes in light, and are pretty much the best thing ever created! Simply tell it what object to find, and it does, about 90% of the time!

A Little Motivation!

2009-01-29T06:29:00.000-05:00

Resident Camera Guru

Small success with camera

2009-01-28T20:43:00.003-05:00

Playing around with a few of the onboard sensors, a combination of useable and somewhat robust sensors were just found. Utilizing the onboard color relearning function (allows for multiple colors to be stored and the most dominate one is passed to other sensors for processing) and auto gain and exposure adjusting, the ball can easily be recognized in both normal and semi-low lighting conditions. The biggest issue is that the auto adjusting features, which without them this process would not work, cause a very slow response time in changes in motion. To correct this, the auto-iris side project must be completed.

Compass Evaluation

2009-01-27T17:23:00.003-05:00

After inspection and evaluation of the compass we think that the compass should be similarly mounted as last year. We will need to do proper calibration which will hopefully fix the drifting gyro correction that was experienced in the past. More updates to follow.

Gantt Chart Updated

2009-01-26T16:07:00.002-05:00

Here is the updated Gantt Chart. We are doing all right for the beginning of the semester but are behind in a few key areas that we need to catch up on.

To download the updated Gantt Chart click here
To download a free .mpp viewer click here

New direction for cameras

2009-01-23T14:52:00.002-05:00

As a result of dissapointing real world testing Wed. a search for a new method of lighting control was started. Two auto-iris lenses were found in our "bag of tricks" and a quest to fit them onto the current system has begun. Currently the connections between the lenses and the DVT cameras do not match, however a seperate subsystem is in the works. A variety of power control chips and a PIC processor are going to be impliment to create a system independant of the main computer that will run from values the DVT will output. High hopes for the usefullness of these lenses ability to control the ever present lighting issue.

Camera Boxes tested

2009-01-23T14:51:00.004-05:00

The new camera boxes have been tested today. They were set at a 16' depth for 2.5 hours using a 5 pound weight in the NARC test pool. No leaks! Perfectly water tight as of now, next step is to check with SEACONs attatched. Not expecting any problems.

This Week's Progress

2009-01-22T16:20:00.002-05:00

Our frame is almost done and it's going to completed very soon.
We need to work on picking out a team name in the near future...hopefully something that's not too embarrassing.
The vision system is being tweaked but at this week's meeting we were able to find a buoy in a lighted and dark room with a light but we want to work on some of the line tracking and underwater factors this week.

Torpedo Idea

2009-01-20T13:57:00.003-05:00

We are starting to brainstorm possible ideas for the "Torpedo device." Here is an idea that Sayre came up with as a possible solution. This might be overly complicating the idea.

2009 AUVSI Rules

2009-01-20T13:52:00.003-05:00

The preliminary 2009 AUVSI Competition Rules are up which is leading us to start designing the mission devices and homing in on what our vehicle needs to be programed for.

You can find the rules here

AUV 2009 Design Video

2009-01-15T12:46:00.003-05:00

This is the video that was shown to the board of visitors and used for our design presentation. It shows our current design for the 2009 vehicle.

First Meeting of the Semester

2009-01-15T11:15:00.005-05:00

The team met for the first time this semester last night. We mostly discussed the progress we have made on the frame, which should be complete by next week, and the layout of the electronics inside the pelican case.

After being plauged by errors while trying to get last year's vehicle up and running Cusch discovered that the computer is fine but believes the problem is in the thrusters' power board. This is good news and means that we should be able to start using the computer to work on code.

The link included with this post is one that was forward to me by Cush on a quality underwater camera. Because of budget and our current design we will be using last year's cameras but might upgrade before the competition if the funding comes through.
Sea Viewer